Sutherland Global Services Placement Papers
Sutherland Interview Questions
Sutherland Aptitude Questions
Sutherland Aptitude, Reasoning and Verbal Ability Questions with Answers
Sutherland Technical Test Questions with Answers Nov 12, 2014
Sutherland Aptitude Test 2013
Sutherland Aptitude Questions 29 Sep 2008 in Chennai
Placement Papers for All Companies
Amiti Software Technologies
Ashok Leyland Ltd
AT & T
AXA Technology Services
Bharti Airtel Ltd
Blue Star Infotech
Citicorp Overseas Software Ltd
CtrlS Datacenters Ltd
Ernst & Young
Harita - TVS
HTC Global Services
IBS Software Services
IndiaBulls Power Limited
Jindal Steel and Power Limited
L & T
L & T Infotech
Linde India Ltd
Lucas - TVS
Mahindra Engineering Services Ltd
Poornam Info Vision
PSI Data Systems Limited
SAP labs India
Sutherland Global Services
UTC Aerospace System
Sutherland Technical Test on Dec 07, 2014
Posted on :10-03-2016
Q1. What is the most probable cause of modem not being able to pick up a dial tone?
A. Defect in phone lineB. ISP downC. Model being set for tone dialD. Modem is set on the mode disable call waiting
Q2. What conversion can take place while operating Windows 98?
A. FAT 16 to FAT 32 and vice versaB. FAT 16 to FAT 32 but reverse is not possibleC. FAT 32 to FAT 16D. FAT 16 to NTFS
Q3. For booting which of these files is NOT required by DOS?
A. MYDOS.SYSB. IO.SYSC. AUTOEXEC.BATD. COMMAND.COM
Q4. What is the consequence of HDD failing and making a grinding noise?
A. Hard Drive goes to laborB. Read/Write head has made contact with platterC. Hard Drive is in power saver modeD. Controller Fault
Q5. Which of these is the latest connector on a printer interface?
A. SCSIB. ParallelC. SerialD. USB
Q6. Conventional memory is of how many KBs?
A. 1048 KBB. 1024 KBC. 256 KBD. 512 KB
Q7. How many devices are functional on a single IDE channel?
A. 4B. 3C. 2D. 1
Q8. ISDN works on which technology?
A. DigitalB. AnalogC. Both Digital and AnalogD. Neither
Q9. Which of these is the simplest way of making a bootable floppy?
A. Use the system c:a:/bootup commandB. Buying oneC. Start -> Settings -> Control Panel -> System -> Create Start Up diskD. None
Q10. In a system which comprises of 1 hard drive and 1 CD ROM what is the best representative placement of the CD-ROM drive?
A. Slave Drive mounted on primary IDE ChannelB. Master Drive mounted on primary IDE ChannelC. Master Drive mounted on secondary IDE ChannelD. Slave Drive mounted on secondary IDE Channel
Q11. Typically, an ideal CD-ROM holds what amount of data?
A. 500 MBB. 650 MBC. 350 MBD. 1000 MB
Q12. A problem appears while opening his attachments in emails, attachment automatically disappears and hence gives rise to an application error. What could have possibly brought this problem?
A. Incorrect settings in case of config.sysB. A falsely loaded e-mail programC. Improper loading of autoexec.batD. A bad virus
Q13. CD-ROM audio cable is connected normally to the?
A. Sound CardB. Hard DiskC. BIOSD. Speaker
Q14. Which command is used to restore the backup copy of an entry in DOS?
A. SCANREGB. CHKREGC. CHKDSKD. SCANDISK
Q15. Physical structure inside any sort of bootable hard disk must contain?
A. MBRB. LBRC. Data StructureD. File Structure
Q16. True or False:
If a computer is on BIOS allow state, you can boot from CD-ROM?
A. TrueB. False
Q17. Firmware essentially represents which part of the PC?
A. RAMB. BIOSC. Floppy DriveD. Hard Drive
Q18. What is the most basic utility of a driver?
A. Telling OS about interaction with the device.B. Modifying application programs so that they work properly with devices being attached to the system.C. Improving the performance of devices installed by optimizing their access patternsD. None of the above
Q19. Scan disk is used for checking and fixing what?
A. DVD ROM drivesB. CD ROM drivesC. Tape DrivesD. Hard Drives
Q20. What should be the contents of IDE hard drive for an AGP slot?
A. Extended partitionB. Dynamic partitionC. Passive partitionD. Active partition
Q21. Which of these devices is connected to a parallel port?
A. KeyboardB. JoystickC. MouseD. Printer
Q22. Operating on Windows 95 from which control panel option can you form a startup disk?
A. AdminB. Add/Remove ProgramC. NetworkD. System
Q23. Once you have replaced the CMOS battery from your PC what should be the next step?
A. FDiskB. Reinstallation of OSC. Setting date and timeD. None of the above
Q24. In windows 98 which utility is used for partitioning a new hard drive?
A. FDISKB. FormatC. Windows ExplorerD. Partition Manager
Q25. To which port is keyboard connected?
A. PS/2B. IEEE 1394C. VGA PortD. Parallel Port
Q26. You discover that a client is having problem with his PC. You report at the house and are about to remove CPU Tower. What is the precautionary step you must take before opening up the CPU Tower?
A. Connect monitor and Wrist Strap to groundB. Make sure ESD has been properly groundedC. Switch off the power properly and plug out the power cordD. Wear a wrist wrap to prevent ESD damage to monitor
Q27. While operating, you have received a CMOS checksum error on the boot. Determine its most likely cause.
A. CMOS battery needs replacementB. BIOS needs updateC. HDD files are not defined properlyD. Power failure
Q28. Consider the following scenario:
A customer has purchased an additional hard disk and subsequently added it to his existing PC. 1st hard drive contains a primary type partition and along with it an extended partition. This extended partition is further subdivided into D and E, the two logical drivers. On installing the secondary hard drive, determine the drive letter which will be allocated to the first logic drive on the extended partition.
Assumption: Second hard disk has 1 primary partition and 1 logic drive on extended partition.
A. DB. FC. ED. G
Q29. Which type of connector do you use in analog modems?
A. BNCB. RJ 11C. RJ 45D. AUI
Q30. Which of the subsequent devices can you relate with an AGP slot?
A. External Storage DiskB. Video CardC. Serial PortD. HDD