PTU Syllabus 2023 ptu.ac.in Check To Download Punjab Technical University Syllabus PDF for UG, PG Courses, Exam Pattern Details Here

PTU Syllabus [email protected] ptu.ac.in

New Update on 01-02-2023: PTU Syllabus 2023 - Gujral Punjab Technical University, Jalandhar prescribes the syllabus of PTU for UG and PG courses. The students appearing for the semester examinations under PTU university must check the syllabus before beginning the preparation. The authority will mention the topics under each subject that students will need to prepare for the exam. To gain access, applicants need to attend the written examination by Punjab Technical University. It’s essential to prepare well for the written test by referring to the PTU Syllabus 2023and Test Pattern 2023 on this page. Reading the topics in the PTU Syllabus Pdf and Exam Pattern will give some idea about the PTU exam. With the help of the PTU Syllabus 2023and Test Pattern 2023, can check all the complete details from this article.

Check - PTU Syllabus 2023

What is the Important of PTU Syllabus 2023?

B.Tech

BTME 301 Strength of Materials – I

Unit –I :

Simple, Compound Stresses and Strains: Stress and Strain and their types, Hook’s law, longitudinal and lateral strain, Poisson’s ratio, stress-strain diagram for ductile and brittle materials, an extension of a bar due to without and with self-weight, a bar of uniform strength, stress in a bar, elastic constants and their significance, relation between elastic constants, Young’s modulus of elasticity, modulus of rigidity and bulk modulus.

Temperature stress and strain calculation due to axial load and variation of temperature in single and compound bars.

Two-dimensional stress system, stress at a point on a plane, principal stresses and principal planes, Mohr’s circle of stress ellipse of stress and their applications. Generalized Hook’s law, principle stresses related to principal strains.

Unit –II :

Bending Moment (B.M) and Shear Force (S.F) Diagrams: S.F and B.M definitions; the relation between load, shear force, and bending moment.

B.M and S.F diagrams for cantilevers simply supported beams with or without overhangs, and calculation of maximum B.M and S.F and the point of contra flexure under the following loads-

a) Concentrated Loads

b) Uniformity distributed loads over the whole span or part of a span

c) Combination of concentrated and uniformly distributed load

d) Uniformly varying loads

e) Application of moments Punjab Technical University B.Tech Mechanical Engineering (ME) Batch 2011 Approved on June 27, 2012

Unit-III :

Bending Stresses In Beams: Assumptions in the simple bending theory; derivation of formula and its application to beams of rectangular, circular and channel, I and T- sections.

Combined direct and bending stresses in afore-mentioned sections, composite/flitched beams.

Unit –IV :

Torsion: Derivation of torsion equation and its assumptions and its application to the hollow and solid circular shafts.

Torsional rigidity, combined torsion, and bending of circular shafts; principal stress and maximum shear stress under combined loading of bending and torsion.

Unit –V :

Columns and struts: Introduction, failure of columns, Euler’s formula, Rankine-Gordon’s formula, Johnson’s empirical formula for axially loaded columns and their applications.

Unit –VI :

Slope and deflection: Relationship between moment, slope, and deflection; method of integration, Macaulay’s method, moment area method, and use of these methods to calculate the slope and deflection for the following:

1. a) Cantilevers

2. b) Simply supported beams with or without overhang

3. c) Under concentrated loads, uniformly distributed loads or a combination of concentrated & uniformly distributed loads.

PTU Exam Pattern 2023

Once the Punjab Technical University has published the PTU Exam Syllabus and Test Pattern, we will update this page. So, after reading the exam syllabus and test pattern 2023, you should carefully prepare for this Punjab Technical University exam. You can quickly answer all of the questions if you read the topics. So, read the PTU Syllabus thoroughly and effectively to pass the PTU test

PTU Syllabus 2023

Engineering Courses

Management Courses

Master of Technology (M-Tech)