- Fresherslive
- Education
- University
- IPU CET M.Tech
IPU CET M.Tech 2020: Application form, Exam Dates, Eligibility, Exam Pattern Here
Monikha | Updated: May 30, 2020, 15:57 IST
IPU CET M.Tech 2020: Application form, Exam Dates, Eligibility, Exam Pattern Here
IPU CET M.Tech 2020 - Overview
IPU CET M.Tech 2020 is released by Guru Gobind Singh Indraprastha University (GGSIPU). The last date to submit IPU CET M.Tech 2020 application form has been re-extended till June 10, 2020.
IPU CET M.Tech 2020 is released by Guru Gobind Singh Indraprastha University (GGSIPU), it has re-extended the last date to submit IPU CET M.Tech 2020 application form has been extended till June 10, 2020. Candidates who registered successfully will have to appear for the respective IPU CET M.Tech 2020. GATE qualified candidates can also appear for IPU CET. Candidates applying for admissions into M.Tech CSE and ECW are not required to venture into the entrance exam. For them, a separate merit list will be released based on GATE scores. Candidates can view all the details related to IPU CET M.Tech from this article.
What are the Important Dates for IPU CET M.Tech 2020?
|
IPU CET 2020 Event |
IPU CET 2020 Date |
|
Release date of application form |
March 3, 2020 |
|
Last Date to submit application form |
June 10, 2020 |
|
Correction facility for application form |
June 11 to 13, 2020 |
|
IPU CET M.Tech 2020 |
Postponed |
|
Result for M.Tech in Tool Engineering, Robotics & Automation |
to be notified |
|
Result for M.Tech in IT/CSE/IS |
to be notified |
|
Result for M.Tech in ECE/DC/SP/RF & M/VLSI)/ Chemical Engineering/Engineering Physics |
to be notified |
|
Result for M.Tech in Nanoscience & Technology |
to be notified |
What is the eligibility to apply for IPU CET 2020?
Before fillingthe IPU CET M.Tech 2020 application firm, candidates must reach the Eligibility ceiteria. After satisfying the Eligibility, candidates can fill the Application Form of IPU CET M.Tech 2020. Candidates can view the Eligibility Criteria from this article.
M.Tech. (Computer Science & Engineering) (Regular)-M.Tech. (Information Technology) (Regular)-M.Tech. (Information Security) (Regular):
Eligibility Criteria:
Minimum 60% or equivalent in the qualifying examination as under
-
B.Tech. / B.E. in Computer Science/Computer Science & Engineering / Computer Engineering / Information Technology /Electronics and Communication Engineering /Electronics & Instrumentation Engineering / Instrumentation & Control Engineering/ Electrical Engineering/Electrical & Electronics Engineering or equivalent.
-
Grad. IETE/AMIE (ECE/CSE/IT/EE).
-
M.Sc. (IT/ Electronics/ Computer Science/Informatics/ Information Science & Technology/ Physics/ Mathematics/ Statistics/ Operation Research/Applied Physics).
-
MCA or MCA (SE)
Admissions Criteria:
-
GATE qualified in Computer Science and Information Technology with a valid and qualified score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 139.
M.Tech. (Digital Communication) (Regular)-(Electronics & Communication Engineering) (Regular)- (VLSI Design) (Regular)-(Signal Processing) (Regular)-(RF & Microwave Engg.) (Regular):
Eligibility Criteria:
Minimum 60% or equivalent in the qualifying examination as under:
-
B.Tech./B.E. in Computer Science/Computer Science & Engineering/Computer Engineering/Information Technology / Electronics and Communication Engineering/Electronics & Instrumentation Engineering/Instrumentation & Control Engineering/ Electrical Engineering/Electrical & Electronics Engineering or equivalent.
-
Grad. IETE/AMIE (ECE/CSE/IT/EE).
-
M.Sc. (IT/ Electronics/ Computer Science/Informatics/ Information Science & Technology/ Physics/ Mathematics/ Statistics/ Operation Research/Applied Physics).
Admissions Criteria:
-
GATE qualified in Electronics and Communication with a valid and qualified score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 140.
For M.Tech (Tool Engineering) (Regular)
Eligibility Criteria:
Minimum 60% or equivalent in the qualifying examination as under: -
-
B.Tech./ B.E. in Tool Engineering/ Mechanical/ Mechanical and Automation /Production/Production and industrial engineering or equivalent.
-
Grad. AMIE (ME)
Admissions Criteria:
-
GATE qualified in Mechanical/Production/Production and industrial Engineering with a valid and qualified score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 147.
For M.Tech. (Nano Science and Technology) (Regular):
Eligibility Criteria:
Minimum 55% or equivalent in the qualifying examinations: M.Sc. (Physics / Applied Physics / Electronics / Mathematics / Chemistry / Biotechnology / Biosciences/ Life Sciences / Material Science);
B.E./B.Tech (Electronics / Computer Science / Electrical / Mechanical / Engineering Physics / Metallurgy / Material Engineering / Information Technology / Biotechnology / Biomedical / Chemical Engineering or Technology); or equivalent
and Mathematics as one of the subjects at 10+2 or undergraduate level is a must.
Admissions Criteria:
- GATE qualified in the relevant discipline with a valid and qualified score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 149.
For M.Tech. (Engineering Physics) (Regular):
Eligibility Criteria:
Minimum 55% or equivalent in the qualifying examinations as under:
BE/B.Tech. Electronics/Computer Science / Electrical / Engineering Physics / Information Technology/Instrumentation & Control or equivalent Or
M.Sc. in Physics / Applied Physics / Electronics / Mathematics or equivalent with minimum of 55% marks in aggregate in the qualifying degree. However, must have studied Physics at the undergraduate level
Admissions Criteria:
-
GATE qualified in the relevant discipline with a valid and Qualified score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 150.
For M.Tech. (Chemical Engineering) (Regular):
Eligibility Criteria:
Minimum 60% or equivalent in the qualifying examinations as under:
-
B.Tech./B.E. in Chemical Engineering or equivalent
Admissions Criteria:
-
GATE qualified in the discipline specified in the eligibility conditions with a valid score card of GATE valid for the academic session 2020-21.
-
CET qualified (for Non-GATE) candidates in CET code 152.
M.Tech. (Computer Science & Engg.):
Eligibility Criteria:
-
B.E./B.Tech/AMIE or equivalent degree in CSE/IT/Computer Engineering/ Software Engineering/ Computer System with 60% marks (cumulative)
-
M.Sc. (Computer Science/Informatics) or equivalent with 60% marks (Cumulative)
-
MCA/MCA (Software Engineering) or equivalent with 60% marks (Cumulative)
Note:
Meaning of equivalent degree shall be considered according to AICTE Gazette notification no. ADVT.-III/4/Exty. /40/2017(162) published on 28th April,2017 for Major Disciplines of Engineering / Technology i.e. (CSE/IT)
Admission Criteria:
There shall be no Entrance Test for this programme / CET. The admission shall be made on the basis of marks / percentage of the qualifying degree.
For M.Tech. (Electronics & Communications Engg.):
Eligibility Criteria:
-
B.E./B.Tech/AMIE or equivalent* degree in Electronics & Communication Engineering/EEE/Electronics Engineering/Instrumentation & Control Engineering,
-
M.Sc. (Electronics/Physics-with specialization in Electronics or Solid State) with 60% marks (Cumulative)
Note:
Meaning of equivalent degree shall be considered according to AICTE Gazette notification no. published on 28th April,2017 for Major Disciplines of Engineering / Technology i.e. (ECE)
Admission Criteria:
There shall be no Entrance Test for this programme / CET. The admission shall be made on the basis of marks / percentage of the qualifying degree.
What are the documents to submit for the IPU CET M.Tech Application Form 2020?
To appeal for IPU CET M.Tech 2020 admission, candidates will have to fill and submit the IPU CET M.Tech 2020 application form within the outstanding date. The IPU CET M.Tech 2020 application form is now available in online mode from March 3, 2020, to June 10, 2020 (extended). Documents to be kept ready while filling IPU CET M.Tech 2020 application form.
-
Scanned image of their Photograph/Signature and left-hand thumb impression. (Candidates must note that images should be in .JPEG/.JPG or.GIF format only and of less than 80 KB in size).
-
GATE 2020 scores (if applying through it)
-
Class 10 and 12 qualifying scores and mark sheets.
-
Category certificate (if applicable).
-
Netbanking or credit/debit card details to pay the application fee.
-
Other important requisite details.
What are the Steps to fill IPU CET M.Tech 2020 Application Form?
The process is given below to fill the IPU CET M.Tech 2020 Application Form. Candidates follow the steps to fill the IPU CET M.Tech 2020 Application Form easily.
-
Select the exam category wished to appear, for from the given list list.
-
Enter the personal details like name, parent’s name, date of birth, gender, etc.
-
Upload requisite scanned images of photo, signature, and thumb impression in the prescribed format.
-
All the details, as mentioned earlier, are entered, candidates will get their login id and password.
-
Select the exam centers, and there will be only one exam center available for IPU CET M.Tech 2020 admission.
-
IPU CET M.Tech 2020 fee Payment Rs 1200 (+bank charges) through debit/credit cards or Net banking.
-
Candidates will have to take a printout of the IPU CET M.Tech 2020 application form for future reference.
What is the IPU CET M.Tech Exam Pattern 2020?
Candidates who will be appering for the entrance exam to get IPU CET M.Tech 2020 admission in GGSIPU must be familiar with the exam pattern of IPU CET M.Tech 2020. Knowing the IPU CET M.Tech 2020 exam pattern will enable candidates to prepare more efficiently. Candidates can refer this article to know the IPU CET M.Tech exam pattern 2020. Details like the mode of the exam, duration, number of questions, maximum marks, and marking scheme are explained below:
|
Particulars |
Details |
|
Mode of exam |
Computer Based Test (Online) |
|
Language |
English |
|
Total no of questions |
100 |
|
Type of questions |
Multiple Choice Questions (Objective) |
|
Duration of exam |
2 hours 30 minutes |
|
Marking scheme |
4 marks for every correct answer 1 mark will be deducted for every incorrect answer |
|
Total marks |
400 |
Latest Exam Updates
KNRUHS Result 2021 (Released) - Download KNRUHS Result, Score Card, Merit List, Cutoff at knruhs.telangana.gov.in
19 hours ago
MGIMS Wardha Application Form 2021 - Check Important Date, Eligibility, Admission, Counselling, Selection Criteria Here
19 hours ago
NCHM JEE 2021 Application Form (Till 20 June) - Check Application Process, Important Dates, Eligibility, Schedule, Details at chmjee.nta.nic.in
19 hours ago
Madras University Distance Education Admission 2021 - Apply for Madras University Registration, Application Form, Courses at ideunom.ac.in
19 hours ago
XIC OET Result 2021 (To be Released) - Check Result Of XIC OET, Final List, Entrance exam Score Card, Merit List at xaviercomm.org
19 hours ago
UP B.Ed JEE Exam Date 2021 (Postponed) - Check New Exam Schedule of Uttar Pradesh B.Ed JEE Exam, Notifications at lkouniv.ac.in
20 hours ago
MBSE HSSLC Result 2022: Check MBSE Mizoram Board HSSLC 12th Result, Release Date, Steps to Download at mbse.edu.in
20 hours ago
UPSEE 2021 Answer Key - Check UPSEE Exam Key for All Sets and Papers PDF, Response Sheet, Steps to Download at upsee.nic.in
20 hours ago
CAT Exam 2021 - Exam Dates, Important Dates, Notification, Registration, Syllabus, Pattern, Eligibility, Result at iimcat.ac.in
20 hours ago
